Press Auxiliary Equipment Upgrade Kits and Technical PDFs

Listed below are Upgrade, Technical and/or Safety Bulletins for Auxiliary Equipment.

B&W MEGTEC is continuously developing upgrade kits for its products. If you do not see an upgrade listed for your particular model, please contact your local B&W MEGTEC office for more information.

Chill Jet

Technical Bulletin:

TCB 022: Chill Jet Nozzle Cleaning

Chill Stand

Technical Bulletin:

TCB 008: Chill Stand-Design Operating Parameters 

Upgrade Bulletin:

UGB 065: Chill Stand Drive Upgrade

DSA Infeed

Upgrade Bulletin:

UGB 076: Coalescing Filter Upgrade for Splicers & Infeeds

ETI Infeed

Upgrade Bulletin:

UGB 076: Coalescing Filter Upgrade for Splicers & Infeeds

HX Infeed

Upgrade Bulletin:

UGB 057: HX Infeed Upgrade

NPC 600 Infeed

Upgrade Bulletin:

UGB 076: Coalescing Filter Upgrade for Splicers & Infeeds

RW (Rewinder)

Upgrade Bulletins:

UGB 043: Drive Upgrade Kit from 590L to 590S for Amal Rewinder RW50 / RW 40 / RWCL

UGB 050: Upgrade from Load Cell to Dancer Regulation for Amal RWCL

Tecturn

Technical Bulletins:

TCB 010: PLI Meter Retrofit Instructions Eurotherm Model 142

TCB 018: PLI Meter Set-Up Eurotherm Model 842 

Upgrade Bulletins:

UGB 002: Center Pivot Modification for TECTURN

UGB 004: Control Panel Repl: Siemens Soft-Touch S-7: TECTURN

UGB 021: Auto Clearance Controller from 929 Analog or 849 Digital: TECTURN

UGB 069: Motherboard Pressure Transducer, Kavlico 351 to Spectre 1000